100% PASS RATE Aruba Certified Switching Professional (ACSP) V1 HPE6-A73 Certified Exam DUMP with 124 Questions
Updates For the Latest HPE6-A73 Free Exam Study Guide!
NEW QUESTION # 51
An administrator wants to track what configuration changes were made on a switch What should the administrator implement to see the configuration changes on an AOS-CX switch?
- A. AAA authorization
- B. VSX synchronization logging
- C. AAA authentication
- D. Network Analysis Engine (NAE)
Answer: D
NEW QUESTION # 52
An administrator in a company of 348 users has a pair of AOS-CX switches with connections to external networks Both switches are configured for OSPF. The administrator wants to import external routes on both switches, but assigns different seed metrics to the routes, as well as imports them as external type-1 routes.
What is the best way for the administrator to accomplish this?
- A. Create a classifier policy with the correct route type and metrics
- B. Define a class and policy map withthe correct route type and metrics.
- C. Define the route type and metrics in the OSPF process.
- D. Create a route map with the correct route type and metrics
Answer: D
NEW QUESTION # 53
What is a concept associated with PIM sparse mode (SM)?
- A. Requires periodic joins to maintain the shortest path tree (SPT).
- B. Reverts to forwarding when the pruning state times out.
- C. Recommended for use when high bandwidth connections exist.
- D. Implements a push content to forward traffic from the multicast source.
Answer: C
NEW QUESTION # 54
An administrator of a company has concerns about upgrading the access layer switches The users rely heavily on wireless and VoIP telephony Which is the best recommendation to ensure a short downtime for the users during upgrading the access layer switches?
- A. Install the in-service software upgrade (ISSU) feature with clustering enabled
- B. Implement VSX on the AOS-CX access switches
- C. install AOS-CX 6300 or 6400 switches with always-on POE.
- D. Implement VSF on the AOS-CX access switches
Answer: C
NEW QUESTION # 55
An administrator will be replacing a campus switching infrastructure with AOS-CX switches that support VSX capabilities The campus involves a core as well as multiple access layers Which feature should the administrator implement to allow both VSX'Capable core switches to process traffic sent to the default gateway in the campus VLANs?
- A. IP helper
- B. VRRP
- C. VRF
- D. Active gateway
Answer: D
NEW QUESTION # 56
Examine the network exhibit.
A company has a guest implementation for wireless and wired access. Wireless access is implemented through a third-party vendor. The company is concerned about wired guest traffic traversing the same network as the employee traffic. The network administrator has established a GRE tunnel between AOS-CX switches where guests are connected to a routing switch in the DMZ.
Which feature should the administrator implement to ensure that the guest traffic is tunneled to the DMZ while the employee traffic is forwarded using OSPF?
- A. OSPF route maps using the "set metric" command
- B. User-based tunneling (UBT)
- C. Classifier policies
- D. Policy-based routing (PBR)
Answer: D
NEW QUESTION # 57
An administrator has an aggregation layer of 8325CX switches configured as a VSX pair. The administrator is concerned that when OSPF network changes occur, the aggregation switches will respond to the changes slowly, and this will affect network connectivity, especially VoIP calls, in the connected access layer switches.
What should the administrator do on the aggregation layer switches to alleviate this issue?D18912E1457D5D1DDCBD40AB3BF70D5D
- A. Implement route aggregation
- B. Implement bidirectional forwarding detection (BFD)
- C. Reduce the hello and dead interval timers
- D. Implement graceful restart
Answer: A
Explanation:
"BFD tests the connectivity between two IP addresses in a BFD session. BFD reports when connectivity is lost. The router (or routing switch) can then use that information to take the appropriate actions, depending on the functions to which you have tied BFD"
NEW QUESTION # 58
An administrator is supporting a network with the access layer consisting of AOS-CX 6300 and 6400 switches. The administrator needs to quickly deploy Aruba IAPs and security cameras in the network, ensuring that the correct QoS and VLAN settings are dynamically applied to the switch ports. Currently, switches are not configured to do device authentication, and no authentication server exists in the network.
Which AOS-CX feature should the administrator use to dynamically assign the policy settings to the correct switch ports?
- A. Change of authorization
- B. Device profiles
- C. Dynamic segmentation
- D. Voice VLANs
Answer: C
NEW QUESTION # 59
A network administrator is implementing NAE on AOS-CX switches. When attempting to create an agent on a particular switch, the agent appears in the NAE Agents panel with a red triangle error symbol and a status of
"Unknown".
What is the cause of this issue?
- A. A connectivity issue exists between NAE and the AOS-CX switch
- B. The RESTful API has not been enabled on the AOS-CX switch
- C. The administrator does not have the appropriate credentials to interact with NAE
- D. The number of scripts or agents has exceeded the hardware's capabilities
Answer: A
Explanation:
Explanation
NEW QUESTION # 60
Examine the network exhibit:
The ACL configuration defined on Core-1 is as follows:
If telnet was being used, which device connection would be permitted and functional in both directions?
(Choose two.)
- A. Client 3 to Client 2
- B. Client 1 to Client 2
- C. Server 1 to Client 1
- D. Server 2 to Client 2
- E. Client 1 to Client 3
Answer: B,C
NEW QUESTION # 61
An administrator implements interim accounting for guest users so that ClearPass can track the amount of bandwidth that guests upload and download. Guests that abuse bandwidth consumption should be disconnected from the network. The administrator configures the following on the AOS-CX access switches:
After performing this configuration, the administrator notices that guest users that have exceeded the guest bandwidth limit are not being disconnected. Upon further investigation, Access Tracker in ClearPass indicates a disconnect CoA message is being sent to the AOS-CX switch.
What is causing this issue?
- A. Bandwidth consumption of the guests is not being reported by the AOS-CX switch.
- B. RADIUS change of authorization is not enabled on the AOS-CX switch.
- C. NTP is not configured on the AOS-CX switch.
- D. There is a time discrepancy between the AOS-CX switch and ClearPass.
Answer: B
NEW QUESTION # 62
Examine the partial output of the BGP routing table of an AOS-CX switch:
The switch is learning about four possible path to reach the 1.0.0.0/8 network. Based on this output, which next-hop route will the AOS-CX select to be placed in the IP routing table?
- A. 192 1684 5
- B. 192 168 2 5
- C. 192 168 1 5
- D. 192 168 3 5
Answer: D
NEW QUESTION # 63
Which protocol does NetEdit use to discover devices in a subnet during the discovery process?
- A. DHCP
- B. LLDP
- C. ICMP
- D. ARP
Answer: B
NEW QUESTION # 64
What is correct regarding rate limiting and egress queue shaping on AOS-CX switches?
- A. Only a traffic rate and burst size can be defined for a queue
- B. Rate limiting and egress queue shaping can be used to restrict inbound traffic
- C. Rate limiting and egress queue shaping can be applied globally
- D. Limits can be defined only for broadcast and multicast traffic
Answer: A
Explanation:
you could apply egress queue shaping to the high priority queues to prevent starvation of low priority queues. Egress queue shaping allows you to apply a maximum bandwidth to a priority queue, as well as a burst size. The port buffers excess traffic up to the burst size and sends the buffered traffic at the max rate, smoothing out bursts while also preventing the high priority queue from exceeding its maximum rate and starving out lower priority queues.
NEW QUESTION # 65
A company requires access by all users guests, and employees to be authenticated Employees will be authenticated using 802 1X. whereas guests will be authenticated using captive portal Which type of authentication must be configured on an AOS-CX switch ports where both guests and employees connect?
- A. 802 1X only
- B. 802.1X, captive portal, and MAC-Auth
- C. Both 802.1X and captive portal
- D. Both 802 1X and MAC-Auth
Answer: D
NEW QUESTION # 66
The network is configured for OSPF with the following attributes:
Core1 and Core2 and ABRs
Area 1 has 20 networks in the 10.1.0.0/16 range
Area 0 has 10 networks in the 10.0.0.0/16 range
Area 2 has 50 networks in the 10.2.0.0/16 range
The ASBR is importing a static route into Area 1
Core2 has a summary for Area 2: area 0.0.0.2 range 10.2.0.0/16 type inter-area Here is the OSPF configuration performed on Core1:
Based on the above information, what is correct?
- A. Core1 has no OSPF routes
- B. Area 1 has 23 routes
- C. Core1 has received one LSA Type 5 from the ASBR
- D. Area 0 has 13 routes
Answer: B
NEW QUESTION # 67
A company has a third-party AAA server solution. The campus access layer was just upgraded to AOS-CX switches that perform access control with MAC-Auth and 802.1X. The company has an Aruba Mobility Controller (MC) solution for wireless, and they want to leverage the firewall policies on the controllers for the wired traffic.
What is correct about how the company should implement a security solution where the wired traffic is processed by the MCs?
- A. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
- B. Implement downloadable user roles with a device role defined on the AOS-CX switches and MCs
- C. Implement downloadable user roles with a gateway role defined on the AOS-CX switches
- D. Implement local user roles with a gateway role defined on the AOS-CX switches
Answer: B
NEW QUESTION # 68
Which option correctly defines how to identify a VLAN as a voice VLAN on an AOS-CX switch?
- A. Switch(config)# vlan <VLAN-ID> voice
- B. Switch(config }# vlan <VLAN-ID>
Switch(config-vtan-<VLAN*lD>)# voice - C. Switch(config)# port-access role <role-name>
Switch^config-pa-roieW vlan access <VLAN-ID> - D. Switch(config)# port-access Jidp-group <LLDP-group-name>
Switch(config-Hdp-group)# vlan <VLAN-ID>
Answer: B
NEW QUESTION # 69
A company has a third-party AAA server solution The campus access layer was just upgraded to AOS-CX switches thatperform access control with MAC-Auth and 802 IX The company has an Aruba Mobility Controller (MC) solution forwireless, and they want to leverage the firewall policies on the controllers for the wired traffic.What is correct about how the company should implement a security solution w here the wired traffic is processed by the MCs?
- A. Implement downloadable user roles with a device role defined on the AOS-CX sw itches and MCs
- B. Implement standards-based RADIUS VSAs to pass policy information directly to the AOS-CX switches and MCs
- C. Implement local user roles with a gateway role defined on the AOS-CX switches.
- D. Implement downloadable user roles with a gateway role defined on the AOS-CX switches.
Answer: C
NEW QUESTION # 70
When implementing user-based tunneling on an AOS-CX switch, which component defines the primary and backup Aruba gateways?
- A. Transit VLAN
- B. Gateway role
- C. Zone
- D. Server group
Answer: C
NEW QUESTION # 71
An administrator is implementing a downloadable user role solution involving AOS-CX switches. The AAA solution and theAOS-CX switches can successfully authenticate users: however the role information fails todownload to the switches. Whatpolicy should be added to an intermediate firewall to allow the downloadable role function to succeed?
- A. Allow TCP 443
- B. Allow TCP 22
- C. Allow UDP 8211
- D. Allow UDP 1811
Answer: A
NEW QUESTION # 72
Which concept is implemented using Aruba's dynamic segmentation?
- A. Colorless port
- B. Root of trust
- C. Device fingerprinting
- D. Zero Touch Provisioning
Answer: A
NEW QUESTION # 73
A company has implemented 802 1X authentication on AOS-CX access switches, where two ClearPass servers are used to implement AAA Each switch has the two servers defined A network engineer notices the following command configured on the AOS'CX switches:
radius-server tracking user-name monitor password plaintext arubal23
What is the purpose of this configuration?
- A. Define the account to implement change of authorization.
- B. Define the account to implement downloadable user roles
- C. implement replay protection for AAA messages
- D. Speed up the AAA authentication process
Answer: D
NEW QUESTION # 74
......
HPE6-A73 exam covers a range of topics, including implementing and configuring Layer 2 and Layer 3 features, troubleshooting ArubaOS-Switches, and implementing security features. Candidates are also tested on their ability to design and implement redundancy solutions, integrate ArubaOS-Switches with other Aruba products, and implement Quality of Service (QoS) mechanisms. Passing the HPE6-A73 exam demonstrates that an individual has the knowledge and skills required to configure and manage complex Aruba campus switching solutions, making them a valuable asset to any organization that uses Aruba technology.
For more info visit
Configuring Hewlett Packard Enterprise GreenLake Solutions HP Reference
Best HPE6-A73 Exam Preparation Material with New Dumps Questions https://testoutce.pass4leader.com/HP/HPE6-A73-exam.html