New 2023 Realistic Free NACE NACE-CIP1-001 Exam Dump Questions and Answer
NACE-CIP1-001 Practice Test Engine: Try These 100 Exam Questions
NACE-CIP1-001 Coating Inspector Level 1 exam is a certification program that provides individuals with the necessary training and knowledge to become certified coating inspectors. Coating Inspector Level 1 certification is recognized globally and is ideal for individuals seeking employment in the coating inspection industry. Coating Inspector Level 1 certification program covers a wide range of topics including surface preparation, coating application, and inspection techniques.
NACE-CIP1-001 Exam is an important certification program for individuals who work in the field of coatings inspection. It provides a standardized assessment of the knowledge and skills required to perform coatings inspections at the entry-level, and is recognized by industry professionals around the world. Passing the exam is a significant achievement for individuals who are looking to establish a career in the coatings industry, and can lead to greater opportunities for advancement and professional development.
NEW QUESTION # 55
The Inspector should record the serial numbers of inspection instruments:
- A. Only if the specification requires it
- B. Only if the instrument is suspected of not working properly
- C. Only when verifying accuracy of the instrument
- D. Each time the instrument is used
Answer: D
NEW QUESTION # 56
Check abrasive blast pressure close to the
- A. blast nozzle
- B. blast pot
- C. compressor
- D. substrate
Answer: A
NEW QUESTION # 57
Conventional spray is a good choice when:
- A. High quality finishes are required
- B. High viscosity coatings are being applied
- C. High transfer efficiency is required
- D. High production rates are required
Answer: A
NEW QUESTION # 58
The Inspector's Log Book is generally:
- A. Shredded by the inspector upon project completion
- B. Shared with all parties upon project completion
- C. Retained by the inspector upon project completion
- D. Submitted to the client upon project completion
Answer: C
NEW QUESTION # 59
Stripe coats are generally applied to:
- A. Edges and corners
- B. a), b), and c)
- C. Complex geometric shapes
- D. Welds
Answer: B
NEW QUESTION # 60
Removal of surface contaminants is done by:
- A. Waterjetting
- B. Scarifying
- C. A combination of methods
- D. Abrasive blasting
Answer: C
NEW QUESTION # 61
In a non-convertible coating the role of the primary solvent is to:
- A. To control the evaporation rate
- B. To make the coating flow out better
- C. To promote faster cure
- D. To dissolve the resin
Answer: A
NEW QUESTION # 62
When using the ISO comparator in accordance with ISO 8503, if the surface profile does not directly compare to one of the four segments the inspector should:
- A. Record your result by identifying two segments
- B. Record the segment with the less aggressive profile
- C. Use another method as the comparator method is too subjective
- D. Record the segment with the more aggressive profile
Answer: B
NEW QUESTION # 63
ISO SA 2.5 is defined as:
- A. Near White Metal Blasting
- B. Very Thorough Blast Cleaning
- C. Thorough Blast Cleaning
- D. Light Blast Cleaning
Answer: B
NEW QUESTION # 64
Prior to the pre-job conference you notice that the Inspection and Test Plan does not require a hold point after surface preparation and coating application. In speaking with the owners' representative in advance of the meeting you sense he/she does not understand the importance of the hold point.
As a NACE CIP Level 1 Inspector your preferred course of action is to:
- A. Default to the owner's Inspection and Test Plan
- B. Bring the matter up at the pre-job conference
- C. Meet separately with the coating manufactures' representative and coating application company in advance of the pre-job conference
- D. Gather data and attempt to meet with the owner's representative in advance of the pre-job conference
Answer: B
NEW QUESTION # 65
Common errors that may produce inaccurate readings when using a Dial-Type Magnetic Pull-Off Dry Filth Thickness (DFT) gauge include:
Select All That Apply
- A. Failing to determine the base metal reading (BMR)
- B. Measuring ditty, tacky, or soft films
- C. Taking measurements too far from the edge of a surface
- D. Rotating the dial too fast when taking measurements
Answer: A,B,D
NEW QUESTION # 66
You ate the NACE Inspector on a job where NACE No. 2/SSPC - SP 10 has been specified. You are finding the Contractor is leaving mill scale on the on surface and as a result you have been rejecting the blast. The Contractor is very upset and has told you that the standard permits up to 5% of the mill scale to remain and still be in be in compliance with the standard.
Your FIRST preferred course of action is to:
- A. Call your supervisor
- B. Review the relevant standard with the Contractor
- C. Permit coating to take place so as not to lose the blast
- D. Shut the job down
Answer: B
NEW QUESTION # 67
The least effective method of surface cleaning is most likely
- A. water blasting.
- B. power tool cleaning.
- C. dry grit blasting.
- D. hand tool cleaning.
Answer: D
NEW QUESTION # 68
To achieve consistently accurate results with ALL alt test equipment
- A. calibrate the instrument in the field.
- B. wash your hands before sampling.
- C. avoid placing the sample discs on a surface.
- D. wear gloves when sampling.
Answer: B
NEW QUESTION # 69
Excess moisture during holiday testing can cause erroneous indications by creating a path across the surface of the coating to pinholes previously detected, or directly to the signal return connection.
This is often referred to as:
- A. transitioning.
- B. telegraphing.
- C. juxtaposing.
- D. monitoring
Answer: B
NEW QUESTION # 70
When applying Thermal Spray Coatings the specification is most likely to refence:
- A. NACE SP 0188
- B. SSPC-CS 23.00/AWS C2.23/NACE No. 12
- C. SSPC PA 2
- D. NACE SP 0178
Answer: B
NEW QUESTION # 71
......
NACE-CIP1-001 certification exam covers a wide range of topics, including surface preparation, coating application, coating inspection, and quality control. NACE-CIP1-001 exam is divided into two parts – a written exam and a practical exam. The written exam consists of 100 multiple-choice questions that cover the theoretical aspects of coating inspection. The practical exam involves hands-on inspection of coatings and is designed to assess the practical skills of the candidate.
Guaranteed Success in CIP Level 1 NACE-CIP1-001 Exam Dumps: https://testoutce.pass4leader.com/NACE/NACE-CIP1-001-exam.html