New Pass4Leader 300-710 Exam Questions| Real 300-710 Dumps Updated on Jan 02, 2022
300-710 Braindumps – 300-710 Questions to Get Better Grades
Skills Measured by 300-710
To get the passing score in the official test, the candidates must address the following skills as described below:
- Configuration — under this exam category, examinees will have to tweak the system configurations of Cisco Firepower Management Center and set up policies such as SSL, intrusion, malware & file, access control, identity, DNS, and pre-filter necessary for the Cisco Firepower Management Center. What is more, applicants will have to be aware of how to use that Center to adjust numerous aspects such as correlation, network discovery, actions, application detectors & Open AppID, intrusion rules & objects, and tweak various devices including QoS, NAT, Platform Settings, VPN, Certificates, and Device Management.
- Management & Troubleshooting — here, candidates must show they have the ability to adjust dashboards & analytics in Firepower Management Center, troubleshoot problems with the help of GUI & FMC CLI, anticipate risks, create reports, and lastly, use packet capture methods to carry out troubleshooting.
- Integration — in the final domain, students must demonstrate their ability to deploy Threat Intelligence Director when investigating security intelligence feeds from third parties, use Firepower Management Center to tweak Cisco AMP for endpoints and networks, explain the Cisco Identify Services Engine (ISE) & the Cisco FMC PxGrid Integration, carry out security checks with the help of the Cisco Threat Response, and finally, detail the use of the Rapid Threat Containment (RTC) feature found inside FMC.
- Deployment — for the initial part, students must be able to incorporate NGFW modes such as transparent & routed ones, deploy NGIPS such as Inline & Passive, incorporate high availability facilities like standby/active failover, link redundancy, and multi-instance, and finally, explain IRB settings.
How to study the Securing Networks with Cisco Firepower (300-710 SNCF) Exam
For the Securing Networks with Cisco Firepower (300-710 SNCF) Exam, Cisco offers several options on their website. Cisco provides classroom training through which Cisco’s authorised learning partners teach instructor-led classes all over the world. E-Learning solutions are provided be Cisco for exam preparation via selp-paced online courses. 300-710 SNCF exam dumps available at certificate-questions are the most suitable study materials. We recommend that students take the 300-710 SNCF practice tests after completing all the training. Students are highly encouraged to join Cisco’s Certification communinty where they can join students from all over the world and learn together. For further exam self-study materials, refer to the links down below:
Classroom Training E-Learning Certification Community Practice Exams
We recommend a combination of hands-on experience, completion of the training course, and self-study in the areas described in the Exam Outline section of this exam guide as preparation for this exam.
Hover on to Cisco’s Website and complete the official training course provided for the exam. Check for the topics mentioned in the Exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.
NEW QUESTION 91
Which command is entered in the Cisco FMC CLI to generate a troubleshooting file?
- A. system support diagnostic-cli
- B. sudo sf_troubleshoot.pl
- C. show running-config
- D. show tech-support chassis
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/sourcefire-defense-center/117663-technote-SourceFire-00.html
NEW QUESTION 92
A network engineer is configuring URL Filtering on Firepower Threat Defense. Which two port requirements on the Firepower Management Center must be validated to allow communication with the cloud service?
(Choose two.)
- A. outbound port TCP/80
- B. inbound port TCP/80
- C. outbound port TCP/443
- D. outbound port TCP/8080
- E. inbound port TCP/443
Answer: A,C
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Securit
NEW QUESTION 93
An organization has a Cisco IPS running in inline mode and is inspecting traffic for malicious activity. When traffic is received by the Cisco IRS, if it is not dropped, how does the traffic get to its destination?
- A. The packets are duplicated and a copy is sent to the destination.
- B. It is transmitted out of the Cisco IPS outside interface.
- C. It is routed back to the Cisco ASA interfaces for transmission.
- D. It is retransmitted from the Cisco IPS inline set.
Answer: C
NEW QUESTION 94
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Explanation
Explanation
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION 95
An engineer has been asked to show application usages automatically on a monthly basis and send the information to management What mechanism should be used to accomplish this task?
- A. reports
- B. dashboards
- C. context explorer
- D. event viewer
Answer: A
NEW QUESTION 96
Which two dynamic routing protocols are supported in Firepower Threat Defense without using FlexConfig?
(Choose two.)
- A. EIGRP
- B. IS-IS
- C. OSPF
- D. BGP
- E. static routing
Answer: C,D
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/660/fdm/fptd-fdm-config-guide-660/fptd- fdm-routing.html
NEW QUESTION 97
Which two types of objects are reusable and supported by Cisco FMC? (Choose two.)
- A. reputation-based objects, such as URL categories
- B. network-based objects that represent FQDN mappings and networks, port/protocol pairs, VXLAN tags, security zones and origin/destination country
- C. network-based objects that represent IP address and networks, port/protocols pairs, VLAN tags, security zones, and origin/destination country
- D. reputation-based objects that represent Security Intelligence feeds and lists, application filters based on category and reputation, and file lists
- E. dynamic key mapping objects that help link HTTP and HTTPS GET requests to Layer 7 application protocols.
Answer: C,D
NEW QUESTION 98
Which limitation applies to Cisco Firepower Management Center dashboards in a multidomain environment?
- A. Child domains cannot view dashboards that originate from an ancestor domain.
- B. Child domains can view but not edit dashboards that originate from an ancestor domain.
- C. Child domains have access to only a limited set of widgets from ancestor domains.
- D. Only the administrator of the top ancestor domain can view dashboards.
Answer: A
NEW QUESTION 99
Which policy rule is included in the deployment of a local DMZ during the initial deployment of a Cisco NGFW through the Cisco FMC GUI?
- A. deny ip any
- B. permit ip any
- C. a default DMZ policy for which only a user can change the IP addresses.
- D. no policy rule is included
Answer: D
Explanation:
Section: Deployment
NEW QUESTION 100
Which two routing options are valid with Cisco Firepower Threat Defense? (Choose two.)
- A. BGPv4 in transparent firewall mode
- B. BGPv4 with nonstop forwarding
- C. ECMP with up to three equal cost paths across multiple interfaces
- D. ECMP with up to three equal cost paths across a single interface
- E. BGPv6
Answer: D,E
Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/security/firepower/601/configuration/guide/fpmc-config- guide-v601/fpmc-config-guide-v60_chapter_01100011.html#ID-2101-0000000e
NEW QUESTION 101
Refer to the exhibit.
And engineer is analyzing the Attacks Risk Report and finds that there are over 300 instances of new operating systems being seen on the network How is the Firepower configuration updated to protect these new operating systems?
- A. The administrator requests a Remediation Recommendation Report from Cisco Firepower
- B. Cisco Firepower automatically updates the policies.
- C. Cisco Firepower gives recommendations to update the policies.
- D. The administrator manually updates the policies.
Ref: https://www.cisco.com/c/en/us/td/docs/security/firepower/60/configuration/guide/fpmc-config-guide-v60/Tailoring_Intrusion_Protection_to_Your_Network_Assets.html
Answer: C
NEW QUESTION 102
A company has many Cisco FTD devices managed by a Cisco FMC. The security model requires that access control rule logs be collected for analysis. The security engineer is concerned that the Cisco FMC will not be able to process the volume of logging that will be generated. Which configuration addresses this concern?
- A. Send Cisco FTD connection events directly to a SIEM system and forward security events from Cisco FMC to the SIEM system for storage and analysis.
- B. Send Cisco FTD connection events and security events to Cisco FMC and configure it to forward logs to SIEM for storage and analysis.
- C. Send Cisco FTD connection events and security events to a cluster of Cisco FMC devices for storage and analysis.
- D. Send Cisco FTD connection events and security events directly to SIEM system for storage and analysis.
Answer: D
NEW QUESTION 103
A network security engineer must export packet captures from the Cisco FMC web browser while troubleshooting an issue. When navigating to the address Error! Hyperlink reference not valid. IP>/capture/CAPI/pcap/test.pcap. an error 403: Forbidden is given instead of the PCAP file. Which action must the engineer take to resolve this issue?
- A. Use the Cisco FTD IP address as the proxy server setting on the browser.
- B. Disable the proxy setting on the browser.
- C. Enable the HTTPS server for the device platform policy.
- D. Disable the HTTPS server and use HTTP instead.
Answer: C
NEW QUESTION 104
While integrating Cisco Umbrella with Cisco Threat Response, a network security engineer wants to automatically push blocking of domains from the Cisco Threat Response interface to Cisco Umbrell a. Which API meets this requirement?
- A. investigate
- B. reporting
- C. enforcement
- D. REST
Answer: C
NEW QUESTION 105
What is a behavior of a Cisco FMC database purge?
- A. User login and history data are removed from the database if the User Activity check box is selected.
- B. The appropriate process is restarted.
- C. Data can be recovered from the device.
- D. The specified data is removed from Cisco FMC and kept for two weeks.
Answer: B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config-guide-v62/management_center_database_purge.pdf
NEW QUESTION 106
Which command-line mode is supported from the Cisco Firepower Management Center CLI?
- A. user
- B. admin
- C. privileged
- D. configuration
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/660/configuration/guide/fpmc-config-guide-v66/command_line_reference.pdf
NEW QUESTION 107
A network administrator is configuring Snort inspection policies and is seeing failed deployment messages in Cisco FMC. What information should the administrator generate for Cisco TAC to help troubleshoot?
- A. A "show tech" file for the device in question.
- B. A "show tech" for the Cisco FMC.
- C. A "troubleshoot" file for the device in question.
- D. A "troubleshoot" file for the Cisco FMC.
Answer: C
NEW QUESTION 108
Which CLI command is used to generate firewall debug messages on a Cisco Firepower?
- A. system support platform
- B. system support dump-table
- C. system support ssl-debug
- D. system support firewall-engine-debug
Answer: D
Explanation:
Reference: https://www.cisco.com/c/en/us/support/docs/security/firepower-ngfw/212330-firepower-management-center-display-acc.html
NEW QUESTION 109
Which two OSPF routing features are configured in Cisco FMC and propagated to Cisco FTD? (Choose two.)
- A. MD5 authentication to OSPF packets
- B. virtual links
- C. OSPFv2 with IPv6 capabilities
- D. SHA authentication to OSPF packets
- E. area boundary router type 1 LSA filtering
Answer: A,B
Explanation:
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/ospf_for_firepower_threat_defense.html
NEW QUESTION 110
An organization has noticed that malware was downloaded from a website that does not currently have a known bad reputation. How will this issue be addresses globally in the quickest way possible and with the least amount of impact?
- A. by creating a URL object in the policy to block the website
- B. Cisco Talos will automatically update the policies.
- C. by denying outbound web access
- D. by Isolating the endpoint
Answer: A
NEW QUESTION 111
Drag and drop the steps to restore an automatic device registration failure on the standby Cisco FMC from the left into the correct order on the right. Not all options are used.
Answer:
Explanation:
Explanation
Explanation
Reference: https://www.cisco.com/c/en/us/td/docs/security/firepower/620/configuration/guide/fpmc-config- guide-v62/firepower_management_center_high_availability.html#id_32288
NEW QUESTION 112
A security engineer found a suspicious file from an employee email address and is trying to upload it for analysis, however the upload is failing. The last registration status is still active. What is the cause for this issue?
- A. The user agent status is set to monitor.
- B. Cisco AMP for Networks is unable to contact Cisco Threat Grid on premise.
- C. Cisco AMP for Networks is unable to contact Cisco Threat Grid Cloud.
- D. There is a host limit set.
Answer: B
NEW QUESTION 113
A network administrator notices that inspection has been interrupted on all non-managed interfaces of a device. What is the cause of this?
- A. Multiple inline interface pairs were added to the same inline interface.
- B. The value of the highest MSS assigned to any non-management interface was changed.
- C. The value of the highest MTU assigned to any non-management interface was changed.
- D. A passive interface was associated with a security zone.
Answer: C
NEW QUESTION 114
......
A popular and widely taken Cisco exam is 300-710 SNCF, which can lead its pursuers to two different and highly valuable Cisco certifications.
300-710 Exam Dumps - Try Best 300-710 Exam Questions: https://testoutce.pass4leader.com/Cisco/300-710-exam.html