Ultimate Guide to Prepare CTAL-TAE Certification Exam for iSQI Advanced Level Test Automation Engineer in 2022
Use Real CTAL-TAE Dumps - ISQI Correct Answers updated on 2022
ISQI CTAL-TAE Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
NEW QUESTION 11
Which of the following success factors for a test automation project is TRUE?
- A. Automated tests that fail due to changes in the requirements of the SUT should be promptly fixed rather than disabled from the test suite
- B. Automated tests must be designed to capture only the data that is strictly needed for comparing expected and actual results
- C. The test cases to be automated first must always be selected based on the number of times a test will need to be run
- D. The test cases to be automated must have a high dependency on particular data values
Answer: A
NEW QUESTION 12
Designing the System Under Test (SUT) for testability is important for a good test automation approach and can also benefit manual test execution.
Which of the following is NOT a consideration when designing for testability?
- A. Control: the SUT needs to provide interfaces that can be used to perform actions on SUT.
- B. Clearly defined architecture: The SUT Architecture needs to provide clear and understandable interfaces giving control and visibility on all test levels.
- C. Observability: The SUT needs to provide interface that give insight into the system.
- D. Re-useability: The code written for the SUT must be re-useable for other similar system.
Answer: C
NEW QUESTION 13
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?
- A. The defect density in the automation code of the regression test suite.
- B. The ratio of commands to executable statements in the automation code of the regression test suite
- C. The SUT code coverage provided by the execution of the regression test suite.
- D. The ratio of comments to executable statements in the SUT code.
Answer: C
NEW QUESTION 14
Which of the following BEST describes why it is important to separate test definition from test execution in a TAA?
- A. It allow choosing different paradigms (e.g event-driven) for the interaction TAS and SUT
- B. It allows testers to find more defects on the SUT
- C. It allows specify test cases without being closely tied to the tool to run them against the SUT
- D. It allows developing steps of the test process without being closely tied to the SUT interface.
Answer: B
NEW QUESTION 15
You identified a suitable project to pilot an automation tool and planned and conduced a pilot. The pilot has been successful and tool Is being deployed within your organization, with a plan to increase tool use by the one project at a time. During this rollout some test processes will be changed slightly to gain additional benefits from using the tool.
In the pilot project, a small set of manual tests were automated for the first time. You are currently monitoring the test automation efficiency and this reveals that the automation regime for the tests is not yet mature.
Which of the following statements is TRUE?
- A. The test process should be radically changed to gain additional benefits from using the tool.
- B. The approach used for deployed this tool is aligned to the standard success factor for deployment
- C. The pilot project should have been critical so that maximum benefits were delivered
- D. The target defined for the project was inappropriate, because the automation regime for the automated tests at the end of the pilot is not yet mature.
Answer: B
NEW QUESTION 16
As a TAE you are evaluating a functional test automation tool that will be for several projects within yourorganization. The projects require that tool to work effectively and efficiently with SUT's in distributed environments. The test automated tool also needs to interface with other existing test tools (test management tool and defect tracking tool.) The existing test tools subject to planned updates and their interface to the test automated tool may not work property after these updates.
Which of the following are the two LEAST important concerns related to the evaluation of the test automation in this scenario?
* Is the test automation tool able to launch processors and execute test cases on multiple machines in
* different environments?
* Does the test automation tool support a licensing scheme that allows accessing different sets?
* Does the testautomation tool have a large feature set, but only part of the features will be sets?
* Do the release notes for the planned updates on existing specify the impacts on their interfaces to other tools?
Does the test automation tool need to install specific libraries that could impact the SUT?
- A. B and E
- B. A and C
- C. C and D
- D. A and E
Answer: A
NEW QUESTION 17
Which of the following is NOT an advantage of test automation?
- A. The ability to find more defects with the same tests, compared to executing the same test manually
- B. The ability to enable a better use of skilled testers by freeing them from repetitive and boring tasks
- C. The ability to perform tests which would be difficult or impossible to execute manually
- D. The ability to run more tests in less time and therefore to make it possible to run them more often
Answer: A
NEW QUESTION 18
Which of the following metrics could suggest, under certain condition that an automated regression test suite has NOT been updated for new functionalities added to the SUT?
- A. The ratio of commands to executable statements in the automation code of the regression test suite
- B. The defect density in the automation code of the regression test suite.
- C. The ratio of comments to executable statements in the SUT code.
- D. The SUT code coverage provided by the execution of the regression test suite.
Answer: B
NEW QUESTION 19
A SUT has an existing automated test suite.
Which of the following statements relating to the introduction of new features in the SUT is TRUE?
- A. The introduction of a new feature could require updates or additions to the testware components
- B. It is generally more difficult to automate test cases for a new feature as the development has not yet started
- C. Automated tests are not affected by the introduction of a new feature and running them against the new SUT is a waste of effort
- D. The test automation engineer should work with the business analysts to ensure the new feature is testable
Answer: A
NEW QUESTION 20
Which of the following is NOT a technical design consideration for a TAA?
- A. Data used by the SUT, e.g configuration, users
- B. Availability of interfaces for the SUT to be testable
- C. The number of users for the SUT
- D. Standards and Legal requirements, e.g data privacy
Answer: C
NEW QUESTION 21
Consider a TAS that is going to be deployed for the first time. The TAS requires share resources and run it its own test environment. The infrastructure for the TAS has been created along with maintenance procedures. It is very unlikely the TAS will be required to work in other target Environments. There is a high-risk that when the TAS is deployed in its own test environment, a number of existing application will no longer work because of conflicts with the existing shared resources.
Which of the following activities would you expect to be MOST effective at mitigating the risk associated with the first deployment of the TAS?
- A. Testing the TAS for its ability to be implemented in other target test environments.
- B. Testing the TAS for regressions due to optimization that fix non-functional issues.
- C. Testing the TAS for ITS ability to run a shared test environment
- D. Testing the TAS for application compatibility issues in the target environment
Answer: A
NEW QUESTION 22
A defect in a SUT has been resolved and validated by an automated defect re-test in the current release of the software. This retest has now been addedto the automated regression test suite.
Which statement BEST describes a reason why this defect could re-occur in future releases?
- A. Automated defect confirmation testing is not effective at confirming that the resolved defect will continue to work in future releases
- B. The automated regression test suite has a narrower scope of functionality
- C. The configuration management process does not properly control the synchronization between software archives
- D. The automated regression test suite is not run consistently for future releases.
Answer: D
NEW QUESTION 23
Which of the following attributes should NOT be included in a test execution report associated with a suite of automated tests?
- A. Environment in which the tests have been executed
- B. Defect clusters identified during test execution
- C. System/Application under test and its version
- D. Summary of the test execution results
Answer: D
NEW QUESTION 24
A web application was released into production one year ago, it has regular release which follow a V-model lifecycle and testing is well-established and fully integration into the development lifecycle. You have beenasked to implement a TAS for the regression test suite. The regression tests have been developed via the GUI and are expected to be run at least four times a month, for each planned release, for the whole operation solution life of the system (six years). Each screen of the GUI uses several third-party controls which are not compatible with the existing automation solutions. The environment for the automation will be stable, fully controllable and separated from other environments (development, staging, production).
What could be the MOST problematic for this TAS?
- A. Complexity to automate
- B. Sustainability of the automated environment
- C. Maturity of the test process
- D. Frequency ofuse
Answer: B
NEW QUESTION 25
What is NOT a factor in considering when you are asked to ensure an effective transition from manual to automated tests?
- A. The look and feel of the SUT
- B. Correctness of test data and test cases
- C. Complexity to automate the manual test cases
- D. The controllability of the SUT
Answer: D
NEW QUESTION 26
......
iSQI Advanced Level Test Automation Engineer -CTAL-TAE Exam-Practice-Dumps: https://testoutce.pass4leader.com/ISQI/CTAL-TAE-exam.html